The training stand has been developed for practical use in corresponding learning fields. In addition to wiring in accordance with the circuit diagram, diagnosis and programming using workshop testers via OBD is also possible. The necessary cable connections between the vehicle electrical system control unit and the installed components must be made by the trainee himself according to the wiring diagram. Laboratory cables with 4 mm safety sockets and different colour coding are used for better identification of the CAN connections between the control units. The inputs and outputs of the installed components are shown in digital print on the front panels. A special foil enables writing on the panels with water-soluble pens. This ensures high practical suitability. As circuit diagram, a continuous plan drawn especially for this system or the original VW circuit diagram consisting of individual pages can be used.
Combination instrument signals over an integrated black box produces the following functions are possible: Signals send signals receive, Signals work on error circuit in the bus system. Apart from the conventional wiring after connection diagram, measuring, fault finding with Oscilloscope or Multimeter and also the diagnosis and programming are possible by means of workshop testers over OBD. In the plant a remainder bus simulator is blocked, in order to produce urgently necessary signals. As connection diagram particularly more drawn a plan sequential for this plant or the original plan from Volkswagen consisting of single sides can be used. The rack consists of high-strength aluminium. The front frame sections hold the base plates provided with digital pressure. The digital pressure is covered with a special foil to write in order to ensure high practice fitness and offers additionally the possibility with water-soluble foil pins on the plates. The mobile rack is equipped with four 125 mm large, braked roles. Below the training course conditions of installed frameworks serves as the admission of a power supply unit. Alternatively the training course conditions can be operated also with a commercial automotive battery. To the capacity a manual with different practical examples, Overhead and connection belongs. Resistant cable are contained of the moreover one for error simulation in the scope of supply.
- Motor vehicle mechatronics technician with focus on passenger car technology
- Automotive mechatronics technician with focus on system and high-voltage technology
- Service technician
- Master craftsman in the automotive technician trade
- Working with circuit diagrams, circuit symbols, terminal designations, cables, cable connections
- Use of the possibilities of standard diagnostic equipment
- Inclusion of problem-solving strategies or alternatives in the diagnosis
- Inspection of individual components and decision on necessary repair measures
- Coding of control units, adaptation of software versions and testing of data communication lines in compliance with legal and manufacturer-specific regulations
- Create the cable connection according to the circuit diagram
- Troubleshooting the central electrical system via OBD diagnostic interface
Immediately operational and mobile functional model, data sheets, circuit diagrams and operating instructions. Alternatively, the training stand can also be operated with a standard vehicle battery. The scope of delivery also includes all necessary connecting cables with 4 mm safety measuring sockets in different colours, the manual with practical examples, information sheets and worksheets as well as a continuously drawn and laminated circuit diagram.
- Immediately ready for use and mobile functional model
- All necessary connecting cables (laboratory cable with 4 mm safety sockets)
- Front side writable with foil pens
- OBD diagnostic interface
The following components are installed:
- Vehicle system control unit
- Steering column control apparatus with switch unit
- Diagnostic interface (gateway)
- Headlight range adjustment manual
- Steering column control apparatus with switch unit
- Light switch
- Windhshield Wiper Motor
- H7 Main headlights
- Fog lamp with associated control unit
- Static cornering light
- Rear lights including rear fog light and reversing light (incl. reversing light switch)
- Raised stop light
- Brake light switch
- Hazard warning switch and interior light with door contact switch
- Power connection: 110/240 Volt Mains connection 300
- Dimensions (L x W x H): 1,600 x 800 x 1,950 mm
- Weight: approx. 140 kg