The training board includes a didactically prepared LOGO! small controller and can therefore be quickly integrated into lessons or laboratory experiments. The training board can be used both as a table-top unit and in standard laboratory table experiment frames (for training boards with a height of A4).
Siemens SIMATIC LOGO! 8 12/24 RCE controller didactically prepared and quickly available on a training board:
For wiring exercises, an input and output byte is routed to 4 mm safety laboratory sockets. The input byte is equipped with toggle switches.
2 analogue inputs & outputs each routed to 4 mm safety laboratory sockets.
The design of the front panel has been optimised for intuitive use. Clear labelling, visual boundaries and meaningful colours help you to find your way around quickly.
One input and output byte each routed to SUB-D sockets. Facilitates quick connection to external devices or other training boards. Set up your own control concept in no time at all.
Ideal for a quick introduction to the teaching unit, little wiring effort and expandable.
- 1 x LOGO! 8 Training board
- 2 x jumper 19 mm red
- 1 x jumper 19 mm blue
- 2 x jumper 19 mm black
- 1 LOGO! Soft Comfort licence (in the latest version)
- Technical documentation manual (on USB stick)
Technical data LOGO! 8 12/24RCE:
- Logic module with display
- Power supply: 12/24 V DC/relay
- 8 digital inputs (4 analogue usable)
- 4 digital outputs
- Memory: 400 blocks
- Modularly expandable
- Ethernet
- Integrated web server
- Cloud interface
- User-defined web pages
- Data logging
- Standard micro SD card
- For LOGO! SOFT COMFORT from version 8.3
Technical data LOGO! DM8 12/24R expansion module:
- Power supply Inputs: 12/24 V DC
- Outputs: Relay
- 4 DE (digital inputs)
- 4 DA (digital outputs)
- For LOGO! 8
Technical data LOGO! AM2 AQ expansion module
- Power supply: 24 V DC
- 2 AA (analogue outputs)
- Output ranges: 0 - 10 V
- Output ranges: 0/4 - 20 mA
Technical data of the training board:
- 8 x digital input 4 mm, incl. toggle switch
- 8 x digital output 4 mm
- 2 x analogue input 4 mm, incl. potentiometer
- 2 x analogue output 4 mm
- 2 x SUB-D 25-pin as interface connector (SUB-D1 = 8x DI, 8x DO, 1x AI, 1x AO SUB-D2 = 2x DI, 1x AI, 1x AO)
- Voltage bus 4 mm, for connecting additional training baords
- Operating voltage 24V DC
- Format DIN A4 Dimensions: approx. 297 x 420 x 180 mm
- Weight: approx. 2.4 kg
- 1 x LOGO! Soft Comfort licence (in the latest version)