The training device "PLC-Trainer 1200" is built on a stable aluminum angle. For
signal input are integrated 8 toggle switches (on - off - momentary on) as well
as two potentiometers for analog value input 0-10 V/DC 10 mA (e.g. simulation setpoint
vs. actual temperature values). The signal input is indicated by eight LEDs (5 mm).
Learning cards can be put on the board's field "Learning Cards" and used there.
The included exercises are based on the principle "From easy to demanding" and are
printed on 34 laminated learning cards. You can easily replace them on the board
as required. You can store the learning cards in the included transparent box. Furthermore
it is possible to put Plug-On Modules - e.g. Motor 2, Traffic Lights 2, etc. (available
as accessories) - on the 24-pin interface connector. The integrated 40-pin interface
connector allows to connect simulation models via a ribbon cable (available as accessories)
- max. 16 in-/outputs. With the slide switch "Infrared Receiver" one input is switched
to IR receiving. This allows to realize 10 addiditional switching states with an
IR remote control. The slide switch "Bero Simulation" turns on a frequency generator
with an adjustable frequency from 60 Hz to 5 KHz. Also a "Horn" can be activated.